okay i have a super winch 1500, and i've been having prob.s with it, sometimes it will work and then it will quit, when i wiggle the wires on the switch it will start back again, and the switch is real hard to get to work sometimes, any body know how i can fix this are can i get a toggle switch from walmart are something to replace it?

 

Contact Superwinch, they gave me a new switch when mine went out, no questions asked...

 

i have the same winch on my recon and i silocond the wires to the switch it works under water

 

You would need to get a double pole/double throw rocker switch. I would suggest contacting a Warn dealer, and see if they will sell you a switch for their winch. I'm pretty sure it's a replacement item. It's a sturdy switch and works great.
My friend has the Super Winch and has the same problem with his. It's a common problem because the switch is chintzy.

 

I emailed Superwinch a few weeks ago, I think the supply of free replacements has dried up, they offerd to sell me one though.
I really doubt that you will find a switch at Wal-Mart to handle the amp load that the winch can draw, its over 90 amps.
I took mine apart, cleaned it and then coated the insides with 80 weight marine oil. It works very smooth now. I would also recommend sealing the contacts in the back like was already suggested.
A Warn rotary switch would be nice, but I bet it will cost ya.

 

Same thing with my winch. I went to my local dealer and got a cycle country switch. The superwinch switches are junk.

 

i have a suder winch 2000 and its doing the same thing . The switch is a piece of junk . Buy the way were can i get another cable that has the hook already on it .