Vampires vs bi-claw tri-claw
#1
Which are better in your opinion on a Honda 300 4x4? 24x9x11, 25x12x12 vampires or 25x9.5x11 bi-claw, 26x12x12 tri-claws. Which will I be able to power the easiest. I want a tire that will do exceptionally well in the mud and then can perform decently on the trails, grass, gravel, dirt, and in the snow. I'm not sure about the 25,26 combo are to big for my machine or am I wrong in my thinking. Please help.
#2
#3
#4
I have a Honda 300 with 25x9.5x12 Vampires on ITP steel wheels. I ride often with two brothers with the same bike, except they have the "old" bi and tri-claws (25") mounted on their stock Honda rims. I have a 2" lift from Highlifter and they do not. They just cannot go where I can. I know the extra height in the center and front of the bike with the lift is a major reason. But, the main difference to me was the slow-speed ride. Their atv's ride was very bumpy and rough as you start out and until you reach 8-10 mph. BUT, the "new" design is supposed to ride smoother. I don't know this for sure. After riding with my friends that have the 300's since '97, they have said the next tire they buy will be the Vampire. I would tell you to take look at the new design bi and triclaw, cause it is a good tire.
#5
Also, tire pressure has a lot to do with the ride. A friend of mine had 25" blackwaters on the back of a 2wd honda 300 and complained about how bad it rode with them. I asked about what kind of air pressure he was running and he said 15lbs. Problem solved. I told him he had about 10lbs too much.
------------------
Andy Bassham *(1999 Arctic Cat 500 4x4, 1989 Honda 300)*
------------------
Andy Bassham *(1999 Arctic Cat 500 4x4, 1989 Honda 300)*
#7
Trending Topics
#8
Matt is right. The 26 and smaller tires still ride just as rough. I remeber when my uncle had the old TSL's. The rid was rough but not nearly as bad as when he put the Bi-claws all the way around. On hard pack you have to do atleast 15mph or were a kidney belt from the vibration.
P.s. We tried changing the pressure but not thing works.
P.s. We tried changing the pressure but not thing works.
#9
#10
Unless you put lots of engine mods on your 300 to get more torgue, then you probably shouldnt get the 26 and 25 inch vamps. Go with the 24 and 25. If you want the flotation go with the 12 inch wide rears. If not go wih the skinny ones, less weight and better self cleaning in the thick stuff.
------------------
Matt Sibley
1999 Honda 300 4x4 Vampires and 2500 lb. winch
------------------
Matt Sibley
1999 Honda 300 4x4 Vampires and 2500 lb. winch