Next steps after a pipe, jet, rev box, K&N filter??
#1
Next steps after a pipe, jet, rev box, K&N filter??
I recently purchaced a 00 400ex off a buddy of mine. I got a great deal on it and I have some extra cash left over to hop it up a little more. It currently has a full Big Gun exhaust system, a K&N filter system, jetted carb (not sure what size jet yet), and Rev box. I want to take the next step to make it a little faster but I cant decide which to do. I think I am to the point where it is going to require several things that go hand in hand. Like piston, head work and a cam. If i could get some info on what would be the next best step that would be great! If you could include approximate costs that would be great too!
Thanks
Ryan
Thanks
Ryan
#2
Next steps after a pipe, jet, rev box, K&N filter??
I have everything you have. The next thing I'm going to do is the 416. There are different levels to the 416 kit. I'm going to do the simplest, bore, piston, and cam. Bore is $50, piston is $90, gaskets is $20, cam is $150-$200. I think I'm going to mail my cylinder to Marcums in Florida and they bore it and send you their kit for $165. That includes the gaskets, piston, new valve seals, and the bore. They also sell the XR cam their for $139, I think. Some people get their head port and polished when they do the 416, $200-?. Some also get a carb, $450. For increase in power, make sure you get a high compression piston, 11:1. And definetly get the cam. For more responses, go to Exriders.com
#3
#5
#7
Next steps after a pipe, jet, rev box, K&N filter??
Its the cam gear flange. You have to press it off the stock cam and press it on the Hotcam. You have to do this with most performance cams, but not all. I just bought a new flange, $20, so I didn't have to press it off the old cam. Getting it pressed off and on shouldn't be that much, $20 at the most I would think.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 09:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)