110cc to a 125cc upgrade / harness issue
Feb 1, 2021 | 02:50 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Feb 2021
Posts: 2
Likes: 0
110cc to a 125cc upgrade / harness issue
I have a tatao 110cc atv that i have purchased an x-pro 125cc engine off amazon... it is a electric start with a semi auto trans. The stator wires coming out of the engine are RED,YELLOW, WHITE, WHITE/BLUE in the connector and then green off by it self.....
Then on the engine harness side I have WHITE, YELLOW , GREEN, WHITE / BLUE in the connector and BLAKC/RED standing by it self..
any help would be appreciated. I am going to make a new connector or hardwire them together but Im making sure where to put what. ]
Thank you!
Then on the engine harness side I have WHITE, YELLOW , GREEN, WHITE / BLUE in the connector and BLAKC/RED standing by it self..
any help would be appreciated. I am going to make a new connector or hardwire them together but Im making sure where to put what. ]
Thank you!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)