Pipe for Prairie 700
#1
I just traded my VForce for a Prairie 700, and I am looking for the best (but affordable) pipe for it. I will use the bike for hunting, so I'm not really interested in something loud. Just a horsepower boost, primarily in the low and mid range. Any suggestions? Also, what's the deal with jetting? Does a new pipe always require re-jetting?
#2
700cc,
I don't have an aftermarket pipe, so I can't suggest the best one for you. However, I believe the addition of an aftermarket pipe should almost always necessitate a change in jetting to accommodate the new air/fuel ratio needed for that pipe. Remember that the change in air box mods/exhaust pipes will mean that more air is flowing through the carbs and thus, you will likely need different jetting to adjust the air/fuel ratio to the appropriate level. Otherwise, you will run much too lean without re-jetting. Happy trails...[img]i/expressions/face-icon-small-smile.gif[/img]
I don't have an aftermarket pipe, so I can't suggest the best one for you. However, I believe the addition of an aftermarket pipe should almost always necessitate a change in jetting to accommodate the new air/fuel ratio needed for that pipe. Remember that the change in air box mods/exhaust pipes will mean that more air is flowing through the carbs and thus, you will likely need different jetting to adjust the air/fuel ratio to the appropriate level. Otherwise, you will run much too lean without re-jetting. Happy trails...[img]i/expressions/face-icon-small-smile.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
Feb 3, 2016 05:00 PM
greg86hd
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
Sep 16, 2015 12:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




