400ex-mojave carb swap
#12
#13
400ex-mojave carb swap
To do the swap is the mounting the same size?
For A stock Mojave with pipe and filter, would the 400ex carb. have to be jetted, and if so how do you figuire out whats needed?
Is it that simple as in pull the stock off, put the new one on and run the new thumb and cable????
For A stock Mojave with pipe and filter, would the 400ex carb. have to be jetted, and if so how do you figuire out whats needed?
Is it that simple as in pull the stock off, put the new one on and run the new thumb and cable????
#14
400ex-mojave carb swap
It will fit on easy with the new cable and thumb throttle but I do not know if you can stretch the stock air tube over the carb. I do not use the stock air box setup. If you are not running a stock air box you will not have a problem. I make an air tube that runs around behind the shock and uses a clamp on filter mounted under the seat area. You can put a clamp on right on the carb and it will work ok but better performance comes from a tube between the carb and filter. You will have to check jetting and change if needed for your setup, but stock 400ex jetting is close.
#16
#17
#18
400ex-mojave carb swap
Hello mojaveaddict
i have been search the forum for the keyword mojave to read and get more information of this modell. I own a 96 and want a little more power here in germany ,where i live the atv scene is still growing.
So here my question what kind of carburator mean "400ex" , which modell was it orignal perhabs also in some motorcycles from Kawa or Honda or...?
So congratulations to your projects ,i have seen the pic and it looks very good and i think it go also fast as it looks.
So happy new year and much more time to work on your Kawas
Tommy
i have been search the forum for the keyword mojave to read and get more information of this modell. I own a 96 and want a little more power here in germany ,where i live the atv scene is still growing.
So here my question what kind of carburator mean "400ex" , which modell was it orignal perhabs also in some motorcycles from Kawa or Honda or...?
So congratulations to your projects ,i have seen the pic and it looks very good and i think it go also fast as it looks.
So happy new year and much more time to work on your Kawas
Tommy
#20
400ex-mojave carb swap
... no they didn`t sell it regulary here and i knew nobody who drive one. Here the most comon is taiwan plastic bombers with any quality for cheap prices and then for the serious you can get yamaha warrior as the most comon ,but used parts for atvs--> nothing.May be you know an alternative from a motor bike?
Happy riding
Tommy
Happy riding
Tommy