any one have info how to take one apart the nuts where you screw in the discs are stripped

 

I had the same problem. Stupid stainless screws are too soft. I ended taking the core out and drilling the screws out then re-welded in new nuts. I replaced the stainless ones with more stainless that were covered with antisieze and after one ride they were frozen/stripped also.

Next time I'm gonna use regular screws loaded with antisieze.

 

Chris142 how did you take the core out was woundering if you take the screw out of the side and tap everything out backwards

 

Ya basically. Mine is held together by the clamp that clamps the muffler to the pipe. Once the clamp is loose you can tap the inner guts and packing out.

I have seen other applications that used a rivit or screw to hold the core in the muffler. If you have this type you must remove/drill out the rivit or screw.