i've drag raced to diferent 400 ex's both had pipe and jet kit same result p700 with about 5 quad length's out of the hole then stay's about the same never got all the way toped out though

 

thanks guys for all of your replies i knew the prairie was fast but i dont kno which on to get now kfx/z 400 or p700

 

iVE BEEN IN SAND DRAGS WITH SOME BEFORE AND YOU WILL GET THEM OUT OF THE HOLE BUT A LITTLE LESS THEN 1/4 TRACK IT PASSES YOU AND IS ABOUT 5 QUAD LENGTHS AHEAD. tHIS 400 HAD A PIPE AND THATS IT.

 

Hey Turbojosh

I live not far from ya. Just across the line in Lynn Indiana. I just started working in Greenville. And I know what ya mean It is cold super cold here there calling for some snow tonight know what ya mean about wanting to ride. I have a new p700 also just put a set of c series wheels on it with 26 inch mudlites with 2500 warn winch only have 10 miles on it and can.t wait to get it out. Might try and get out some tomorrow. And kick it around alittle.

Coyotecaller

 

I have raced with my P650 against the P700 and Kfx400. I had a quad length on them right off the start (probably due to my clutch springs set-up changes and the holeshot module). After 35mph, the P700 and Kfx400 passed me. P700 was in front of the Kfx400 all the way to 60mph. And then the Kfx 400 slowly passed the P700 after 60mph. Me (P650) and the P700 had a difference of three quads lengths (the P700 being in front of me even with all of my modification) and maintained that distance with both having a top speed of 62mph.

 

The kfx 400 will do about 70 in the 1/8th of a mile, and i was still climbing when i pulled off, and that was on a ahra drag strip, sand wise, only thing that has touched my 400 was the 450 yamaha, and it smoked my ***, i just had too!!!!!!!!!!!!!! see [img]i/expressions/face-icon-small-tongue.gif[/img]