Was looking for place to hook up, says for batt. equipped quad hook to pulse trigger wire on stator. Wonder if I could hook in line with vehicle down sensor to shut fuel pump along with ignition ? Or is that something that should be removed? Where do you hook the P.D. kill switch ?

 

I'll leave this posted in case anyone else was wondering... do advanced search of Pro Design-- good link there to explain hookup.

 

all you should have to do is look for the grey wire in the keyed harness..Ground one side of your kill then hook the other to the grey wire.
Wham! your done.......

 

This is the link I used to help install mine......pretty good instructions with several step-by-step photos: http://aerolite103.com/VForce2004/V-Force%202004.htm

 

Mentalstate is correct. I hooked mine up by connecting 1 wire to the gray wire coming out of the ignition key switch and connected the other wire to ground (I used a screw that bolts down the thermostat to the frame). Its easy to do, but I found it takes a little time b/c I had to remove the front fenders to get to everything.

Good luck and happy trails...[img]i/expressions/face-icon-small-smile.gif[/img]

 

only thing I removed was black cover on front of atv...took 10 mins to hook up...