What are the steps to removing it? I hear you get about 2mph on top end?
thanks

 

btt

 

You can unbolt KEBC from the belt housing,DO NOT unplug it.Take the belt housing off 10mm socket,there is a fork looking thing that drags on the front of the clutch,take all of the fork parts and a spring thing out.Make sure and not trip the belt switch inside of the housing,put the housing back on and the KEBC motor back on and you are ready to run.When you turn the atv on & off you will still hear the KEBC working and also when you let off the gas when you are riding.I have done this for a buddy with a Prairie is very easy to do.When I had the housing off I also put a stock Vforce clutch spring in it,helped alot with the bottom end power.Hope this helps!!!![img]i/expressions/face-icon-small-happy.gif[/img]

 

thanks

 

I don't see how you can gain top end by removing it... there's alot more effective ways to increase topend.

 

I read it constantly put pressure on the belt or something like that, so i guess ill find out. lol