360 CLUTCH KITS
#3
360 CLUTCH KITS
The site works there are not a ton of 360 owners doing mods yet.
When I talked to EPI they recommended a red primary and red secondary spring for our 360. I have the red secondary in and it didn't make a huge difference but it is noticable. It causes the rpms to build quicker giving more mid range and reducing the top speed some. I have not put the red primary in yet but I know it will raise the engagement RPM which i didn't want to do. Plus we are inbetween houses right now so I don't have a workshop to try it much less a place to test ride. Allot of people run the black seconday springs and like them.
When I talked to EPI they recommended a red primary and red secondary spring for our 360. I have the red secondary in and it didn't make a huge difference but it is noticable. It causes the rpms to build quicker giving more mid range and reducing the top speed some. I have not put the red primary in yet but I know it will raise the engagement RPM which i didn't want to do. Plus we are inbetween houses right now so I don't have a workshop to try it much less a place to test ride. Allot of people run the black seconday springs and like them.
#4
360 CLUTCH KITS
Hey JROCS--site works fine---sorry you didnt get an answer sooner---me as a 360 owner , i love to see new 360 folks post on this forum--I seem to have done almost everything i can think of to mine to speed it up other than major clutch mods---My guess would be that nobody yet has tried the EPI 360 kit---although I have installed the black secondary spring as have a few others, and also some posts on the red spring also , I Think??
Try it and do keep us posted on results, and we will share with you any info we have all gathered. I would love to do a major clutch mod, but i dont understand tha clutches well enough yet
My suggestion to you would be to shim your needle jet, this seems to be a major improvement on the 360 (if that is what you have??) Or check into the dyna jet kit for the 360. All my mods didnt kick in until I started playing with the jets.
WELCOME ABOARD
Try it and do keep us posted on results, and we will share with you any info we have all gathered. I would love to do a major clutch mod, but i dont understand tha clutches well enough yet
My suggestion to you would be to shim your needle jet, this seems to be a major improvement on the 360 (if that is what you have??) Or check into the dyna jet kit for the 360. All my mods didnt kick in until I started playing with the jets.
WELCOME ABOARD
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 09:38 AM
cdstang
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
08-31-2015 07:52 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)