Please Help. 650 problem
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I've has my carb apart about 20 times today. After shiming my needles, the quad would not run above 1/3 throttle. After much troubleshooting I've removed the shims and gone back to stock.
I still have the same problem. Idles and starts great anything above 1/3 throttle and it starts to die out(bog). If I hold it wide open it will not accelerate and will barely run. At zero to 1/3 throttle you'd never know there was a problem. PLEASE HELP....I'm stumped.
I still have the same problem. Idles and starts great anything above 1/3 throttle and it starts to die out(bog). If I hold it wide open it will not accelerate and will barely run. At zero to 1/3 throttle you'd never know there was a problem. PLEASE HELP....I'm stumped.
#2
#4
#7
Trending Topics
#8
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Choke isn't stuck, and the rubber shield isn't blocking the intake. I actually found that the shield was blocking the intake and thought I'd found my problem several teardowns ago...no luck. Belt switch isn't tripped. It doesn't miss or run like a tripped switch either. It goes from normal to a steady blahhh if you push the throttle more than 1/3-1/2. It does act like its not getting enough air, but I can't figure it out. Anyone with a suggestion please chime in.
#10