Just got my 04 P700. I was just wondering if the stock prarie can normally pull the front wheels off the ground from a stand still. I am able to after I hit about 5 miles an hour, but it seems a little sluggish from a stand still. Other than that this quad has got all you want and then some.

 

That is the way they come from the dealer, timing retarded, I have a Dyna CDI. There are other models of CDI's that are out there for your quad. Any Aftermarket CDI will help you on bottom end. That would be a good start. good luck.

 

I have a DG 3 ($140.00) and my 04 P700 will stand on end ... you had better be holding on!!!!!!!!!!!!!!

 

when you install a dg3 do you have to rejet?

 

I agree with Grownman, ya better be holding on if you install that module, and No rejetting needed

 

They have a dg5 that is better supposedly than the dg3 for the same price 140.00 and with a flywheel key for 20.00 dollars you should have a fast 4x4.

 

Do you have any pictures of these car climbs i would like to see some.

 

Mine would it in low in stock trim... But now with the mods I've done, even in high gear, no-pulling required I can stand it on the rack!! Just Love my P700!!! Now if I can just figure out a way to mount a turbo, I'm in heaven!! hehehe