Can you tell me how to change out the front brake pads on a 360?

 

a little help please

 

If its anything like the P400, and I bet it is, its really easy. Just have to bend the tangs on the two bolt heads on the caliper so you can loosen and remove the two bolts. The caliper will then come off and the pads are held in place by the two bolts you took out. compress the piston back into the caliper with a C-Clamp, but take off your brake fluid cover first and wrap something around it to catch any excess fluid. Put the new pads in, put the two bolts back in and bend the tangs so they wont come loose, pump the brakes to get the firm back in them and viola. 20 minute job, both sides.