Tire/Rim Size Q?
#1
Tire/Rim Size Q?
Skat-Trak recomends thier Extreme 24x11-10 for the kfx 700. Action offroad offers a combo but they are back ordered. Their site says the tires are mounted on Douglas .190 10x11 rims (in 4/136 lug pattern). I can not find 10x11 rims ANYWHERE! (Douglas web site doesn't even list them) Am I reading this wrong? Any help would be greatly appreciated.
Thanks
J
Thanks
J
#4
#6
Tire/Rim Size Q?
Ok, when your tire is only 11" wide you shouldnt use an 11" wide rim, you want the bead to seat and it wont do it well if the rim width is as big or bigger than the tire.
Now you will need to make sure you get the right offset and the right bolt pattern, but you want 10x10 or 10x9 rims.
Now you will need to make sure you get the right offset and the right bolt pattern, but you want 10x10 or 10x9 rims.
#7
Tire/Rim Size Q?
Like Heathen said, the 24X11-10 extreme haulers on 10X11 wheels was made as a combo specifically for the vforce. Its design is to take a 24" tall tire and flatten out the profile, so you end up with about a 22 " or so tall tire that is fat and a much flatter profile. You will NOT have any bead seating problems. This setup has been out for over a year and many guys are runnning it. It was made to give the big heavy Vforce more flotation in the sand. I have much smaller 22X11-10 edges mounted on 10X10 wheels, and it flattens them out also.
Thread
Thread Starter
Forum
Replies
Last Post
Chasso
2) Chassis problems..
1
09-19-2015 03:06 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)