Mojave Torque Specs
#1
Mojave Torque Specs
Can someone tell me the engine torque specs when reassembling the engine? The one I can think of that I will need are:
Case bolts
Cover bolts (mag and clutch)
Clutch basket
Flywheel
Counterbalancer gear
Head bolts
Cylinder bolts
Valve cover bolts
Anything else?
Or if someone could scan the torque spec page and scan or email (chrisaparker@hotmail.com) that would be awsome!
Thanks in advance. [img]i/expressions/face-icon-small-smile.gif[/img]
Case bolts
Cover bolts (mag and clutch)
Clutch basket
Flywheel
Counterbalancer gear
Head bolts
Cylinder bolts
Valve cover bolts
Anything else?
Or if someone could scan the torque spec page and scan or email (chrisaparker@hotmail.com) that would be awsome!
Thanks in advance. [img]i/expressions/face-icon-small-smile.gif[/img]
#2
Mojave Torque Specs
check out this web site and give the guy a call. He knows just about everytihng about mojaves and lakotas. www.cycleworksracing.com the phone 717 637 1907
#3
Mojave Torque Specs
Case bolts= 87 in lbs
Cover bolts (mag and clutch) no specs given, just don't strip them!
Clutch basket= 87 in lbs
Flywheel= 69 ft lbs
Left side balancer gear nut= 58 ft lbs
Head bolts 6mm= 87 in lbs and 10mm= 33 ft lbs cylinder head nuts 8mm= 18 ft lbs
Cylinder bolts 6mm= 87 in lbs
Valve cover bolts= 69 in lbs
Water pump impeller nut= 69 in lbs
Camshaft bearing cap bols=104 in lbs
Camshaft sprocket bolt= 29 ft lbs
Hope this helps
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
1ArmBandit
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
55
10-14-2015 09:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)