HEY guys i got a call from the shop about why the check belt light came on and thay said it was b/c the belt was a little lose and arent thy spouse to be a little lose in the frist place??? i could push it down about a 1/2 inch and i know on snow sled that if you can do that its fine.... but back to the light i know it comes on when it need to be survised and so i changed the oil and filter put new one one and new oil in and then took it to the shop to have them clean the carb and jets and they said thats why the light came on (lose belt) [img]i/expressions/face-icon-small-confused.gif[/img] HHHHHHHHHEEEEEEEEEEEEEEELLLLLLLLLLLLPPPPPPPPPPP

 

HELP PLEASE!!

 

is the light flashing at the .35 sec intervals or is it stay on. If if is flashing, it may need adjusted or just get a new belt. Mine was flashing and i changed the belt and did the reset procedure and wammy, perfect.

 

it just stays on it dont flash its in the shop and they say its to lose and i looked at it my slef and theres about the right amoutn of play in it so i told them to leave it

 

at 100 hours it comes on but does not go into "limp mode". do you have about 100 hours on it?

 

i think so we have been riding it sence i think april and i used it twice during hunting season just to pull to deer out of the woods and then it set till april but i did play a cupple time with it in the snow so yea it probley does have a100 hours on it

 

here is the reset procedure for the belt light.
belt light reset