i would just be carefull if it topples over you like emeraldisleatv said before[img]i/expressions/face-icon-small-wink.gif[/img]

 

http://media.putfile.com/Matt-Stull-ATV

This is what i do, vids

 

Check out my avatar. It wheelies in high or low, just about anywhere.

 

if your showing off for your buddys...you can hit the back brake before the rack hits...it'll come down fast...they'll be amazed at how you didn't go over

 

Scratching the grab bar is a real B***ch...I was doing a 3rd gear wheelie down mainstreet in this town in the rocky mountains impressin these girls and i rode the back bar for a good 5 secs while still seated haha. totally wasnt expecting it... [img]i/expressions/face-icon-small-sad.gif[/img]

 

Just make sure you don't have it in 4 wheel. My brother had a blazer that was full time 4 wheel. He built an insane 454 for the thing. When he test drove it for the first time, HIS BLAZER DID A WHEELIE!!! Well, when the front end came down it blew the stub axles right out. They were literally laying right on the ground (in pieces) He ended up on his fourth tranny, I don't know how many transfers, and third set of axles when he sold it.

 

AND never do donuts in 4wd, haha i learned that the hard way.

 

I got my 78 Bronco with 33s (pretty big at the time, the biggest you'd usually see around then was 35s) to do a 4wd donut. Not on purpose thogh. I thought I had put it back in 2 wheel. Man it was hard to get it going. Then when it was going it was more like I was spinning on a center axis than doing a donut.

 

if it gets to high up just tap the back brakes and it will come right back down[img]i/expressions/face-icon-small-smile.gif[/img]