i put a supertrapp ids2 quiet series exhaust on my cousins lakota today. it has most of the mods mine has except the clutch plates and srings. i put in the 138 jet and used all the discs, but it ran to rich. if i put in the 134 jet how many discs should i use, or shouldnt i drop to the 134?
oh ya and his headpipe is leaking with the new pipe(right where it bolts to the head) is there anything i can seal this up with besides ordering a new gasket? atleast until a new gasket comes? like high heat liquid gasket?
thanks

 

for jetts a 134 might be too small dependingon how rich its running, although they are hard to find try to get your hands on a 136. You might also need to get a smaller pilot jet and ajust the needle a bit. It will take alot of playing around with it to get the jetting right on. As far as the head pipe leaking use some non silacone gasket sealer/maker(the black kind) and it will seal it right up or you could get a new one of those crunch gaskets at many hardware stores or a autozone or napa.

 

i was just wondering, if he bought another set of discs and used like 18 would that lean it out enough to use the 138? because it was a little rich with 12 discs

 

i would only use the discs that it came with because thats what was ment to be used so it looks like you need to change the jetts