BF750 noises
#11
#12
BF750 noises
Using a mechanic's stethscope exactly locate where the noise is coming from. According to your own words, it sounds like it could be either the rod bearing (bottom of the engine) or the cam chains (there are 2 types, intermediate and upper) up mid/top of the engine. If your engine ingested dirt/water, you cam chains will wear out real fast and the auto-cam chain tensioner can be maxed out in which case the chains have to be replaced. The dirt/water in the engine can also damage the lower rod bearings as well. Correct diagnosis is the first step you should take.
#13
BF750 noises
just find all the bolts that hold the tensioners in i think there is two on left side pullstart side.pull the springs or stretch them.and see what that does for noise did good for me.i really dont know what the long term fix is,i guess new chains.i was told by so called prof.that it was my clutch so i took it off same noises.try this.
Thread
Thread Starter
Forum
Replies
Last Post
jrooker6
Polaris
18
04-23-2016 07:36 PM
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)