valves
#1
#2
valves
It can be a pain if you don't have the tools or any idea what you're doing. I can think of at least 3 special tools you need to either buy or make. One is a valve spring compressor that will work for atv's and not just cars (a big c-clamp and a piece or folded metal will work too). Next is some contraption to pull the rocker shafts out of the head. Usually a piece of metal and the cam bolt will work as a puller to pull them out. Next is a valve lapper and some valve grinding compound. You'll need a gasket kit or at least the head gasket. And new valve seals.
If you have the right tools and know what you are doing, its not that bad of a job. Otherwise, get a big window of time and some good music and a good drink and take your time.
If you have the right tools and know what you are doing, its not that bad of a job. Otherwise, get a big window of time and some good music and a good drink and take your time.
Thread
Thread Starter
Forum
Replies
Last Post
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)