OK, I need to replace my timing chain, I took of the stator cover and inside there is a round magnet (I think its part of the stator and/or rotates around it) and I can't take the damn thing off or know where to start. I think it spins off but I had no luck in that. I have done everything else to this machine, but this well and the clutch, If anyone could help ( maybe justrandy [img]i/expressions/face-icon-small-happy.gif[/img] ) that would be awesome, Thanks in advance!!!!

 

Anybody?

 

First, you need to get a flywheel puller, 30mmx1.5 I'm pretty sure, but not certain. Its right hand thread and female.

Take the left cover off, use puller to remove flywheel, take starter chain and sprockets off, take cover off head and remove cam sprocket, remove chain.

Be careful using the puller not to damage the end of the crankshaft by pulling too hard. Maybe use a torch to heat the flywheel AS your pulling it. Heat it uniformly, but not too much.

Let me know if you need me to go into more detail.

 

So, I will have to buy a flywheel puller[img]i/expressions/face-icon-small-mad.gif[/img] Is the flywheel the big round magnet that the stator goes inside? And it looks like some sort of weird nut or something spins on to hold the 'flywheel" on is that true or am I not getting it at all lol. But really thanks for the help. I would go buy a book but after this I think I will know this atv like the back of my hand!![img]i/expressions/beer.gif[/img]

 

Well I guess I will have to take it in for the first time. All the people on here has never done this before?

 

<div class="FTQUOTE"><begin quote>Originally posted by: lakotaman420
So, I will have to buy a flywheel puller[img][/img] Is the flywheel the big round magnet that the stator goes inside? </end quote></div>

Yes and yes.

<div class="FTQUOTE"><begin quote>Originally posted by: lakotaman420
And it looks like some sort of weird nut or something spins on to hold the 'flywheel" on is that true or am I not getting it at all lol. </end quote></div>

There should be anut holding it on. Take that off and use the puller to pull the flywheel.

<div class="FTQUOTE"><begin quote>Originally posted by: lakotaman420
But really thanks for the help. I would go buy a book but after this I think I will know this atv like the back of my hand!![img][/img]</end quote></div>


The book is only $30