I am trying to get starter solonoid to work it will not click.If i could look at wiring diagram for key switch,kill and start button and starter solonoid would help. I think that some wires are crossed.help appreciated for a site or place for diagram.thanks Randy

 

Before anything else, check to make sure single black wire from the starter relay/solenoid is grounded to the left side of the engine (as you sit on the quad), especially where it makes a contact to the metal surface (clean, no rust, no paint, etc.).

 

Thanks for reply,Worked more on 220 today,I do have a ground. I can jump the 2 black wires, one comes from the start button switch to starter relay and the other black wire leaves starter relay and goes to start solonid.and it will start.there is something wrong but i don't know what.

 

some one has cut and taped several wires near solonid and relay

 

send me your email and i will send the info for a bayou 300,should be the same