mojave smoke?
#1
mojave smoke?
I have recently done a complete rebuild on my 2001 mojave right down to splitting the block. ive got it completely assembled and everything works great with the exception that it smokes pretty bad. i drove it for about twenty mins hoping it would clear up but it didnt. i have full compression and new valve seals i dont know what else it could be. and it is oil smoke. any ideas?
#2
mojave smoke?
Could be a ton of things.
I would vote for something like you put the rings in upside down.
Could also be something like worn valves and or guides. New seals in this case is just not going to cut it.
Maybe too much clearance between the bore and piston?
It just could be soooooooo many things.
I would vote for something like you put the rings in upside down.
Could also be something like worn valves and or guides. New seals in this case is just not going to cut it.
Maybe too much clearance between the bore and piston?
It just could be soooooooo many things.
#3
#4
#5
mojave smoke?
well ill have to tear it back down and check that out. im very mechanically inclined but workin on atvs is a first for me so im still learning. i pretty much built this fourwheeler from the ground up so if this is the only problem i got im ok. i appreciate your help thanks a bunch
#6
Thread
Thread Starter
Forum
Replies
Last Post
jrooker6
Polaris
18
04-23-2016 07:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)