was plowing snow the other day and the quad started sputtering . I kept it running for another 30 secs or so by burping the throttle quickly a bunch of times but it finally stalled. I still had 2 bars showing on the gas gauge, but added some anyway. Tried to restart and noticed I had no lights on display of the dash. found the 30 a fuse blown. replaced that and now its in limp mode w/ belt light flashing. Removed old belt, put on a new 1 and did the belt light reset.( have done this procedure many times in the past..its an 04 prairie)..still have a blinking belt light, and of course no 4wd. Igniter possibly ? any thoughts

 

Did you confirm that the toggle switch is at the normal "ON" position?

If it is at ON position and th light still would not reset by doing the reset procedure, YES, the igniter is shot, possibly when the 30 amp fuse blew up.