Kawasaki Discussions about Kawasaki ATVs.

klf300 smoking after rebuild

Thread Tools
 
Search this Thread
 
Old Jun 4, 2013 | 05:02 PM
  #1  
big_nate's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jun 2013
Posts: 1
Likes: 0
Unhappy klf300 smoking after rebuild

ok i bought a 96 klf300 that had a very rough life. they ran it with no air filter and abused the hell out of it then left it to sit. had to bore it 50 over to get the rust pitting out of the cylinder. anyway, it goes without saying it smoked pretty bad before the rebuild.
now i have it back together and i was just warming it up riding around my house and it started smoking almost as bad as it used to once it got warm. my only idea is oil build up in the exhaust from before the rebuild burning off but i'm worried it could be something more serious. any other idea's or should i just ride it and hope it all burns off.

thanks,
big_nate
 
Reply
Old Jun 4, 2013 | 09:44 PM
  #2  
Sykwidit's Avatar
Range Rover
Joined: Feb 2013
Posts: 131
Likes: 0
Default

Run the atv with no oil. Not Drive run and let it cook the oil out the exhaust. Also the valves might need to be rejusted. Don't try the no oil unless you have a idea of what I mean.

So idle it in the yard drive around with no oil. Burn it off. Check the plug make sure your running fine not to lean also. Check the vavle and then just drive it. I have murder my bayou the past couple weeks. Front drive going before the motor lol
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EIF
Chinese Quads
1
Apr 20, 2017 07:15 PM
Beeline08
Yamaha
3
Nov 11, 2016 04:00 PM
2many2ride
Honda
7
Sep 27, 2015 04:35 AM
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
Sep 25, 2015 01:39 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:19 AM.