I have a Lakota and i was wondering if you guys could tell me where the air and fuel mixture screw is because it's running way to rich.

 

On the very bottom of the carb. facing straight down. It is a flat head screw. It's easiest with a 90 degree angle driver. You may want to loosen the carb. and rotate it a little so you can see better. You won't miss it.

 

Wich way do you turn it if it is running to rich. If you sittingon the quad do you turn it right or left. Thanks for the help.

 

Here's the way Dyno Jet told me how to do it. SuperTrap agreed. Loosen the screw counter clockwise until the machine starts to run poorly. Back off until smooths out. Check the plug again after running it. This method worked well for me. Hopefully someone will post if there is something I'm missing.