Kawasaki Discussions about Kawasaki ATVs.

650 Chattering

Thread Tools
 
Search this Thread
 
Old Aug 11, 2001 | 05:39 PM
  #1  
PrairieRider's Avatar
Thread Starter
|
Weekend Warrior
Joined: Aug 2001
Posts: 4
Likes: 0
Default

Hi,

I have seen several messages posted regarding a chattering coming from 650s when letting off the throttle or descending a hill in low gear. I also had this problem and it turned out to be a shifting linkage adjustment. Just got my machine back from the dealer and its running quiet as can be now, hope this helps some other folks.
 
Reply
Old Aug 11, 2001 | 06:12 PM
  #2  
bobbbb's Avatar
Trailblazer
Joined: Jul 1999
Posts: 57
Likes: 0
Default

had the same problem was a easy fix
 
Reply
Old Aug 11, 2001 | 11:06 PM
  #3  
jefffoxsr's Avatar
Pro Rider
Joined: Oct 2000
Posts: 1,265
Likes: 0
Default

Great. I was waiting for someone to tell us what is was that the dealer had adjusted for a few guys. What part of the shifting linkage needs to be adjusted, and how to I do it? I have the service manual, so it should be easy if you can tell me exactly what to adjust.



Bobbbb, how exactly did you make the adjustment on yours?

Thanks.
 
Reply
Old Aug 12, 2001 | 09:51 AM
  #4  
PrairieRider's Avatar
Thread Starter
|
Weekend Warrior
Joined: Aug 2001
Posts: 4
Likes: 0
Default

From talking with the dealer Jeff I assumed the adjustment was made on the tie rod end shown in the service manual, maybe bobbb can give you some better details.

 
Reply
Old Aug 12, 2001 | 02:37 PM
  #5  
MJSTX's Avatar
Range Rover
Joined: Nov 2000
Posts: 110
Likes: 1
Default

Being an owner of a KVF 650 and having experienced some of this chattering, I would also like to know what these adjustments are? I also have purchased the manual so if you could tell me what has to be adjusted, I am sure the manual will give the procedures to adjust this. If anybody else would like to have this procedure, I would be willing to post it if I could find out what this adjustment is? Thanks in advanced for your responce......... Maurice
 
Reply
Old Aug 12, 2001 | 08:43 PM
  #6  
bobbbb's Avatar
Trailblazer
Joined: Jul 1999
Posts: 57
Likes: 0
Default

Remove the covering air brather and you will see the shifting rod. I removed the plastic around the airbreather i dont know if this is needed but it made it easier. there is two locknuts on rod you have to loosenturn rod counter clockwise for mine anyways. good luck. the dealer would have done this for me but that meant taking to shop enjoying ridin this baby
 
Reply
Old Aug 13, 2001 | 04:18 PM
  #7  
jefffoxsr's Avatar
Pro Rider
Joined: Oct 2000
Posts: 1,265
Likes: 0
Default

I've been slowly making adjustments to this rod over the last few hours and I can't seem to make the chatter in low gear go away. Any help is appreciated.
 
Reply
Old Aug 13, 2001 | 06:49 PM
  #8  
bobbbb's Avatar
Trailblazer
Joined: Jul 1999
Posts: 57
Likes: 0
Default

not sure dude it worked for me. let us know how you make out
 
Reply
Old Aug 13, 2001 | 08:09 PM
  #9  
jefffoxsr's Avatar
Pro Rider
Joined: Oct 2000
Posts: 1,265
Likes: 0
Default

To clarify the chatter. This one is when you get on and off the gas. It chatters when you let off. It doesn't do it in high gear or reverse. It only does it in Low gear. Some other people have had the same thing.
 
Reply
Old Aug 14, 2001 | 07:17 PM
  #10  
bobbbb's Avatar
Trailblazer
Joined: Jul 1999
Posts: 57
Likes: 0
Default

that is the same as i had
 
Reply



All times are GMT -5. The time now is 08:07 AM.