Tuning a mojave carb...
#1
Tuning a mojave carb...
OK, this thing has been a PIA! I've pulled it numerous times and cleaned all the jets out, adjusted the float levels numerous times. Here's what it still does:
I can't get the float level right, so I either overflow the bowl ,and it comes out the overflow and it floods and is a SERIOUS PIA to start again. When I get it adjusted to where it no longer does this, I get fuel starvation at higher RPMS. Also, when the quad is running, if I snap the throttle wide open from an idle, it'll sputter and die. If I progressivly increase the throttle, it will rev up like it's supposed to. Any tips/suggestions/other?
Also, I need a new choke cable, or fitting. Right where the choke plugs into the carb, the plastic threads have stripped. Anyone know where to get a new? (Besides dealer)
Thanks!
I can't get the float level right, so I either overflow the bowl ,and it comes out the overflow and it floods and is a SERIOUS PIA to start again. When I get it adjusted to where it no longer does this, I get fuel starvation at higher RPMS. Also, when the quad is running, if I snap the throttle wide open from an idle, it'll sputter and die. If I progressivly increase the throttle, it will rev up like it's supposed to. Any tips/suggestions/other?
Also, I need a new choke cable, or fitting. Right where the choke plugs into the carb, the plastic threads have stripped. Anyone know where to get a new? (Besides dealer)
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Elkaholic
Land, Trail and Environmental Issues
1
09-06-2015 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)