no spark on lt80
#1
no spark on lt80
Hey guy's I'm a noobie to this forum,been looking around for awhile this place seems a whole lot better than the one I have been a member of for a long time. Any ways here is my ? I got an 198? lt80 and it wont start,I have fuel and compression about 85psi,but no spark.Does any one have any quick checks for pick up coil and stator? I'm not too sure about two strokes the stator on this only has two wires,and all my 4strokes have three.I really dont feel like buying a service manual so any info. will be great. Thanks in advance Jason.
#3
#4
#5
#7
Trending Topics
#8
no spark on lt80
Well then I guess it's back to the garage.Thanks for the input guy's, I'll pull the right cover and fly wheel and maybe the top end just to see whats happening in there. A friend of mine gave me the bike so I have 0.00 in it right now, and I don't know the history of it either,this will give me a good start. Thanks again, Jason
#9
no spark on lt80
OK guy's removed the flywheel and cleaned and sanded it it was nasty.good call LT80. But I sill have weak spark, I can put my hand between the wire and ground and it feels like a 9volt battery is that normal ? I know I have to put a top end in it, but I would like to see how much the ignition is going to cost first. Thanks again, Jason
#10