Behind stator / crank bearing grease ???
#1
Behind stator / crank bearing grease ???
.
Took some time today and removed our deactived Oil Pump from our Pred-90. Before I reassemble, what grease (if any) should be re-applied behind the stator / right crank bearing area?
For a visual of this area, surf:
- Press Here for BEFORE picture -
- Press here for AFTER picture -
If this small crank bearing area needs to be re-packed with grease, what type of grease, and to what level? Re: 1/4 level, 1/2 full, etc.
Many thanks.
.
Took some time today and removed our deactived Oil Pump from our Pred-90. Before I reassemble, what grease (if any) should be re-applied behind the stator / right crank bearing area?
For a visual of this area, surf:
- Press Here for BEFORE picture -
- Press here for AFTER picture -
If this small crank bearing area needs to be re-packed with grease, what type of grease, and to what level? Re: 1/4 level, 1/2 full, etc.
Many thanks.
.
#2
#3
Behind stator / crank bearing grease ???
.
Thanks Newnick.
I checked the E-Ton & Kolpin Service manuals and each of them showed "clean pictures". And I didn't see any mention of adding grease / oil to the bearing or the oil pump gear. Very weird. I think it's left over grease from the factory oil pump gear lubrication as well...
.
Thanks Newnick.
I checked the E-Ton & Kolpin Service manuals and each of them showed "clean pictures". And I didn't see any mention of adding grease / oil to the bearing or the oil pump gear. Very weird. I think it's left over grease from the factory oil pump gear lubrication as well...
.
#4
Behind stator / crank bearing grease ???
.
Task all done. It's back together again. Only thing to do is wait for our air filter to dry then, "fire her up!!!".
For pictures, surf: http://community.webshots.com/album/130997005nxNiAA
Happy surfing...
.
Task all done. It's back together again. Only thing to do is wait for our air filter to dry then, "fire her up!!!".
For pictures, surf: http://community.webshots.com/album/130997005nxNiAA
Happy surfing...
.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)