Eton 90

Is there anyway to correct a slight toe-out? I would much rather it have toe-in..

 

.

For TOE adjustment instructions, surf page 37 & page 38 within:

http://webzoom.freewebs.com/miniatvs/Viper%20Manual.pdf


To adjust the TOE, loosen the both lock nuts on the Tie Rod, and turn both Tie Rods the same amount. Then, tighten the lock nuts back down. One lock nut is normal thread direction and the other is the opposite hread direction. For safety, you should consider using the TOE adjustment measurements that are within this Service Manual. Having too much TOE IN is dangerious.

Hope this helps...

.

 

Depends on the quad but too much toe-in can make it REAL squirley and more prone to rollover.

 

I like the toe-in to be a light 1/8th inch.