Kids Quads Discussions about Kid's Quads and other ATV's.

Can't get it started!

Thread Tools
 
Search this Thread
 
  #1  
Old 09-08-2006, 08:52 AM
300exBirddog's Avatar
Trailblazer
Thread Starter
Join Date: Feb 2005
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default Can't get it started!

 
  #2  
Old 09-08-2006, 08:55 AM
300exBirddog's Avatar
Trailblazer
Thread Starter
Join Date: Feb 2005
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default Can't get it started!

Any ideas on what is wrong w/this quad.
Sundiro Ridgerunner 50cc, 2 cycle.
Has spark, getting fuel to the motor, has 65psi for compression.
I have even shot fuel into the cylinder and carb just to see if it would pop.
It does nothing but turn over.
Any ideas out there?
 
  #3  
Old 09-08-2006, 10:20 AM
sheepdogMSP8117's Avatar
Pro Rider
Join Date: Aug 2006
Posts: 1,578
Likes: 0
Received 0 Likes on 0 Posts
Default Can't get it started!

Try starting fluid and a new spark plug. Make sure the air filter isn't clogged. And make sure the exhaust isn't plugged, if there's a spark arrestor, it might need to be cleaned.

Good luck.
 
  #4  
Old 09-08-2006, 10:21 AM
Scooter86's Avatar
Extreme Pro Rider
Knows Old ATV Questions!
Join Date: Sep 2003
Posts: 5,127
Likes: 0
Received 3 Likes on 3 Posts
Default Can't get it started!

Isn't 65psi a bit low for compression?
 
  #5  
Old 09-08-2006, 10:47 AM
300exBirddog's Avatar
Trailblazer
Thread Starter
Join Date: Feb 2005
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default Can't get it started!

I was not sure if the compression is low for this quad.
I have tried the starting fluid into the cylinder and carb w/out airfilter installed.
 
  #6  
Old 09-08-2006, 12:01 PM
Raptorlegs's Avatar
T Rex Rider
What irritates me is!
Those 6-packs work pretty good.
Join Date: Jun 2003
Location: Oeste Del Tejas
Posts: 16,801
Likes: 0
Received 1 Like on 1 Post
Default Can't get it started!

65psi is too low. You held the throttle open while testing?
 
  #7  
Old 09-08-2006, 12:14 PM
300exBirddog's Avatar
Trailblazer
Thread Starter
Join Date: Feb 2005
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default Can't get it started!

I do not think that I had the thottle open when checking the preasure. Does it make a difference?
 
  #8  
Old 09-08-2006, 12:30 PM
Raptorlegs's Avatar
T Rex Rider
What irritates me is!
Those 6-packs work pretty good.
Join Date: Jun 2003
Location: Oeste Del Tejas
Posts: 16,801
Likes: 0
Received 1 Like on 1 Post
Default Can't get it started!

You're reading will be low if you don't.
 
  #9  
Old 09-08-2006, 12:39 PM
300exBirddog's Avatar
Trailblazer
Thread Starter
Join Date: Feb 2005
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default Can't get it started!

I will test it again then. What should I be getting for PSI? I am not familiar w/2 cycle motors and their corks.
 
  #10  
Old 09-08-2006, 01:53 PM
Raptorlegs's Avatar
T Rex Rider
What irritates me is!
Those 6-packs work pretty good.
Join Date: Jun 2003
Location: Oeste Del Tejas
Posts: 16,801
Likes: 0
Received 1 Like on 1 Post
Default Can't get it started!

Over 100, I would think.
 


Quick Reply: Can't get it started!



All times are GMT -5. The time now is 08:26 AM.