cdi box on a Raptor 50
#4
cdi box on a Raptor 50
I can provide the pdf pages but you need to send me a private message with your email or just post it if your not worried about giving it out so I can send them (I don't see a way to attach files here). I have the 80 electrical on hand but the 50 electrical is at home so it will come later.
#7
cdi box on a Raptor 50
the harness from the 80 would be best (would allow you to make the CDI easily removable) but you can cut the wires at the 50 connectors and the 80 CDI connectors and then splice the correct ones back together (hardwire it in). have you also done the carb. slider and throttle change ?
Trending Topics
#8
cdi box on a Raptor 50
Before winter I did the carb slide and throttle mods. It helped a little but it didn't shift into drive right and sounded like it needed some adjustment. By putting in this cdi I figured it would help a lot. Will I need to rejet the carb by doing all of this? My next thing will be spacers and tires. Maybe a new filter.
#9
cdi box on a Raptor 50
change the main jet to a #80. make sure you adjust the idle/air and idle speed after the jet and slider change (you may have stalling problems when you put it in gear if you don't). I added ITP tires and rims and wheel spacers to my sons 80. the thing rides and handles much better. my daughters
50 with the 80 stock tires on it, procom 50 CDI and carb changes does 25mph. I suspect with the 80 CDI it will be slightly higher. if your looking for a little more power off the line I have read that people are removing 8 of the 12 ***** from the clutch basket. allows the engine to rev higher before the clutch engages.
50 with the 80 stock tires on it, procom 50 CDI and carb changes does 25mph. I suspect with the 80 CDI it will be slightly higher. if your looking for a little more power off the line I have read that people are removing 8 of the 12 ***** from the clutch basket. allows the engine to rev higher before the clutch engages.
#10