Redcat 110 crank assenbly
#1
Redcat 110 crank assenbly
Hi,
A couple of weeks ago my daughter's atv started to have some problems, The motor started fine but it had difficulty to move. So i tried to adjust the clutch, though it did a tiny improvement the problem was still there. So i figured it was time to change the clutch since we used the ATV for 2 years without major problem. I ordered a new clutch and special socket to take it apart. To my surprise when i removed the cover i found out that the tip of the crank shaft was broken ( twisted). Now is it better to change the crank assembly or buy a new whole motor. How difficult it is to split the cases ? Any place to buy reasonable priced parts ? Is the Honda atc 110 crank assembly compatible with the Red cat ?
Thanks
A couple of weeks ago my daughter's atv started to have some problems, The motor started fine but it had difficulty to move. So i tried to adjust the clutch, though it did a tiny improvement the problem was still there. So i figured it was time to change the clutch since we used the ATV for 2 years without major problem. I ordered a new clutch and special socket to take it apart. To my surprise when i removed the cover i found out that the tip of the crank shaft was broken ( twisted). Now is it better to change the crank assembly or buy a new whole motor. How difficult it is to split the cases ? Any place to buy reasonable priced parts ? Is the Honda atc 110 crank assembly compatible with the Red cat ?
Thanks
#2
Redcat 110 crank assenbly
redcatmotors has the crankshaft in stock at $40.99 part no. 100757 plus don't for get all the gaskets, head, cylinder,center crankcase, right crankcase, valve cover, left cover, while you at it might as well put a new cylinder ($13.99) piston ($26.99) and rings (?) or you could purchase the whole engine at $347.00 ,you can contact redcatmotors at 602 256-2282, this should take somewhere around 4-8 hours to complete depending on your ability.
#3
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)