LT 80 for drag race
#1
I have a 1997 lt 80 that I am wanting to turn into a drag race atv. I bought it from a guy that had his son tt racing it. It is pretty fast but will not leave at all. I would like to do a full engine build and would like some help before I spend the $$$'s. I have no clue what has been done to it other than the dg pipe that I can see. If anybody can help it would be very appreciated. Thanks ahead of time.
#2
Welcome to the forums.[img]i/expressions/face-icon-small-smile.gif[/img]
I'm sure I can help.
I have LT80's turning 7.2 seconds in 300ft.
If it has a DG pipe on it, he wasn't that serious of a racer as there are better performing pipes out there.
To tell what's been done, I'd need pics of alot of parts.
I'm sure I can help.
I have LT80's turning 7.2 seconds in 300ft.
If it has a DG pipe on it, he wasn't that serious of a racer as there are better performing pipes out there.
To tell what's been done, I'd need pics of alot of parts.
#3
I want to start over. I have access to alot of lt80 stock parts and would rather go that route. It runs good now but it has been built for a while and there is a few fairly stock blasters that we would like to spank.
#5
Well I dont think they will help, but I dont know how hacked up my parts are inside. This bike was set up some time back and I am sure there is alot better parts and technology now. I am looking for crank, cyl, head, carb and clutch work. I really need this thing to leave hard of the line. This is where the are killing us. Thanks for the help
#6
Chances are your parts are fine. I get them in "race ported by bozo" all the time.
We buy very little. Like I said, we mod all the stock parts (like you are looking for).
Why the crank?
We buy very little. Like I said, we mod all the stock parts (like you are looking for).
Why the crank?
#7
So I'm looking for some ideas for drag racing the lt80 too if anyone thats knows a few things replys I'd be more than happy to list the mods done so far thanks
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)






