<div class="FTQUOTE"><begin quote>Originally posted by: outofline

Looking at the other Chinese atv's that have gone with 300 and up the price is upwards of $3-4000, at this price point the great price savings of a Chinese atv kind of goes away! You can find a clean big 4 for $3000 pretty much every where!</end quote></div>

At those prices people wont put up with many failures either.

 

<div class="FTQUOTE"><begin quote>Originally posted by: JETMOTO

biskit134

The engine close is from a Honda XL XR 125-200 1979-1987



With few differences.</end quote></div>

Eugene, Great to see you posting!! [img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]

Did they copy everything but the overhead cam? Those engines had a OHC and the Jetmoto motors are push rod engines. [img]i/expressions/face-icon-small-confused.gif[/img]

This is why I thought it was a Yamaha but never could find a push rod Yamaha engine either. [img]i/expressions/face-icon-small-confused.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img]

 

Me too... Hey, linky on the Panterra no worky... anyway, I have heard that the 350 is looking like about June. Supposed to new from the floor up... It should still come in well under what a Raptor 350 will cost...

 

<div class="FTQUOTE"><begin quote>Originally posted by: biskit134

Ok, I did some work on the Jet. Ported and polished head, and did some exhaust work. Also polished the valve skirts. Bottom end got a bit more grunt, but where you can tell the difference is when it gets into second gear. Now, full throttle and a quick shift will pull the front wheels a hair... really woke it up in the middle and tall gears. Got a vid coming...</end quote></div>

biskit134, you polished the head and the exhaust port? how polished? mirror like or just smooth out the casting marks? Also did you recut the valves or lap them in? Or did you leave them alone?

Thanks.[img]i/expressions/face-icon-small-smile.gif[/img]

 

<div class="FTQUOTE"><begin quote>Originally posted by: biskit134

Me too... Hey, linky on the Panterra no worky... anyway, I have heard that the 350 is looking like about June. Supposed to new from the floor up... It should still come in well under what a Raptor 350 will cost...</end quote></div>

Try it this http://www.panterramotors.ca/atvs.html

 

<div class="FTQUOTE"><begin quote>Originally posted by: Sawyer

Try it this http://www.panterramotors.ca/atvs.html</end quote></div>

Thanks Sawyer!

Is there more than one pic of the quad?

 

I dug thru the manual some and if its accurate it might be the best chinese /english translation ever.

 

MWQ, I polished it on up. Not quite mirror, but pretty slick. As far as the valves, they seated quite nicely, so I just polished the skirts.

I also found on the four stroke forum that Panterra is now Baja, or Baja bought them I think.

 

<div class="FTQUOTE"><begin quote>Originally posted by: mywifesquad

I dug thru the manual some and if its accurate it might be the best chinese /english translation ever.</end quote></div>

Yes I thought it was pretty good to for a chinese quad manual. Also if you look at the parts manual it almost like they copied page for page from the main line company they copied it from.

 

Bumped per a request!