Baja 90cc atv push start and nothing
#1
Baja 90cc atv push start and nothing
Have a Baja 90cc atv for my son. Good battery and push start and nothing, not even click. Checked safety kill in back-fully inserted. Almost as if it is not being recognized in neutral.
Can anyone help? Should I just be looking for salvage money at this point?
Can anyone help? Should I just be looking for salvage money at this point?
#2
Baja 90cc atv push start and nothing
I am not familiar with the Baja 90, but I would just check over all the wires. We got to the races on Saturday and the Eton would not start. There was nothing, just like you described. I found one wire unplugged just behind the ignition switch and one under the tank on the right side that was half unplugged. Plugged both in and it was just like new.
#3
Baja 90cc atv push start and nothing
does the head light light up? if so the check the brake switch and the left kill switch will only kill the spark not the crank.
Look for a green with red stripe make sure it is NOT connected to anything unless it has a neutral lamp on the handle bars.
I have had to replace 3 wire harnesses with similar issues, some of the wires rub through and short the FUSE so check it too......let me know if this helps
Look for a green with red stripe make sure it is NOT connected to anything unless it has a neutral lamp on the handle bars.
I have had to replace 3 wire harnesses with similar issues, some of the wires rub through and short the FUSE so check it too......let me know if this helps
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Drivetrain, Suspension & Tires
0
06-08-2015 06:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)