looking to download roketa engine manual
#1
looking to download roketa engine manual
hello, looking to download roketa engine manual for 110 atv79
clucth is out
thanks sandquad
sandquad@yahoo.com
clucth is out
thanks sandquad
sandquad@yahoo.com
#2
#3
looking to download roketa engine manual
<div class="FTQUOTE"><begin quote>Originally posted by: sandquad
hello, looking to download roketa engine manual for 110 atv79
clucth is out
thanks sandquad
sandquad@yahoo.com</end quote></div>
don't need a manual to replace the clutch.
instructions for roketa atv79 automatic transmission or any 50-110cc chinese atv automatic transmission
drain oil
remove right side engine cover
bend back clutch nut retainer
remove clutch nut, you can purchase a special tool, make one out of a 7/8 socket or just use a punch and hammer, these nuts are not nornally over torque, almost just finger tight.
remove clutch
reverse order to reinstall
now adjust the clutch
on the right side of the engine cover is the clutch adjuster, it consists of a stud and lock nut
loosen lock nut while holding stud with a screw deiver
turn stud counterclock wise until resistance is felt,then back off 1/8 turn
tighten locknut while holding stud with screwdriver
note: their's 2 differant types of clutches for the automatic transmission, so you need to remove the existing clutch to make sure you buy the correct clutch,
if you need any more help my e-mail is luvmysxs@yahoo.com
hello, looking to download roketa engine manual for 110 atv79
clucth is out
thanks sandquad
sandquad@yahoo.com</end quote></div>
don't need a manual to replace the clutch.
instructions for roketa atv79 automatic transmission or any 50-110cc chinese atv automatic transmission
drain oil
remove right side engine cover
bend back clutch nut retainer
remove clutch nut, you can purchase a special tool, make one out of a 7/8 socket or just use a punch and hammer, these nuts are not nornally over torque, almost just finger tight.
remove clutch
reverse order to reinstall
now adjust the clutch
on the right side of the engine cover is the clutch adjuster, it consists of a stud and lock nut
loosen lock nut while holding stud with a screw deiver
turn stud counterclock wise until resistance is felt,then back off 1/8 turn
tighten locknut while holding stud with screwdriver
note: their's 2 differant types of clutches for the automatic transmission, so you need to remove the existing clutch to make sure you buy the correct clutch,
if you need any more help my e-mail is luvmysxs@yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-18-2015 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)