I need to gear down a 2008 TAOTAO 110F. I see lots of sprockets on Ebay but none would fit. PM with what you have?

 

I have a 125D. I'm changing the front sprocket from a 13 tooth to a 12 tooth. Takes about 5 minutes to remove the cover, chain and sprocket.
I ordered the new ones from http://www.buyatvsonline.com part # 400033. You need to specify in the notes section what tooth you want.

Read the below thread. It was very helpful information as was the individuals on here. Good luck..
http://forums.atvconnection.co...eadid=540723&forumid=1

 

I already have a 12T front sprocket. But I still need a larger rear in 44-48T range.

 

<div class="FTQUOTE"><begin quote>Originally posted by: djvjr

I have a 125D. I'm changing the front sprocket from a 13 tooth to a 12 tooth. Takes about 5 minutes to remove the cover, chain and sprocket.

I ordered the new ones from http://www.buyatvsonline.com part # 400033. You need to specify in the notes section what tooth you want.



Read the below thread. It was very helpful information as was the individuals on here. Good luck..

http://forums.atvconnection.co...eadid=540723&forumid=1</end quote></div>



that says its only for the 50,70,90 & 110?????? did yours work??????????

 

Front sprocket worked fine. Easy to change. Needed to grind down the sprocket hold down as the ends hindered the chain. 10 minutes total time.

I still want to find rear sprockets as is still geared way too high. If you find them, let me know.

 

<div class="FTQUOTE"><begin quote>Originally posted by: djvjr

Front sprocket worked fine. Easy to change. Needed to grind down the sprocket hold down as the ends hindered the chain. 10 minutes total time.



I still want to find rear sprockets as is still geared way too high. If you find them, let me know.</end quote></div>

so i wonder why it says its only for the 50,70,90, & 110

 

will any of these work?

http://www.china-parts.co.uk/acatalog/Sprockets.html

http://www.scooterparts4less.com/web...arSprocket.htm

http://www.google.com/products?sourc...num=4&ct=title