150cc gearbox
#11
#12
Join Date: Dec 2008
Location: Tracy, California, USA
Posts: 3,260
Likes: 0
Received 12 Likes
on
12 Posts
According to the exploded diagram on a GY6 the clutch output drives a shaft to the final transmission inside the GY6 engine. This has about a half cup of gear oil in it, so you would know if you managed to work your way into this part. The then output shaft of the final transmission drives the forward/reverse gearbox. The output of that drive the chain sprocket.
I still don't know if we are talking about problems before the clutch (like the CVT belt), the final transmission, or the forward reverse gearbox .
#13
Sorry about the confusion. I believe the problem is with the F/R Gear Box. The reason I believe that is because the engine will run, the main shaft will turn, the clutch will turn but the Gears will not move. So I am thinking there is something wrong between the Clutch and the Gear Box. I have taken the CVT cover off and the Gear box cover along with the chain, sproket, etc...I do not see anything visually wrong. I can turn the Gears by hand but as I said before that will turn while the engine is running.
#14
Join Date: Dec 2008
Location: Tracy, California, USA
Posts: 3,260
Likes: 0
Received 12 Likes
on
12 Posts
There's a whole transmission between the clutch output shaft and the Forward/reverse gearbox that drives the sprocket. This is slightly buried in the GY6 motor and has several gears in it (and gear oil). Do not confuse this with the F/R gearbox, which is a bolt on addition to the GY6 motor.
I think you need to remove the F/R gearbox and see if the final drive output shaft (from the GY6 final transmission) to the Forward/reverse gear box is turning. This will tell you whether the problem is in the GY6 final drive transmission or the F/R gear box.
Do you have a GY6 service manual? They are out there, and downloadable for free. If you don't have one I can probably find some links. I could just email you one (or several different ones for that matter), but they are each huge - probably more than your or my ISP will allow in an email attachment.
I think you need to remove the F/R gearbox and see if the final drive output shaft (from the GY6 final transmission) to the Forward/reverse gear box is turning. This will tell you whether the problem is in the GY6 final drive transmission or the F/R gear box.
Do you have a GY6 service manual? They are out there, and downloadable for free. If you don't have one I can probably find some links. I could just email you one (or several different ones for that matter), but they are each huge - probably more than your or my ISP will allow in an email attachment.
#15
#16
Join Date: Dec 2008
Location: Tracy, California, USA
Posts: 3,260
Likes: 0
Received 12 Likes
on
12 Posts
This link has two more links to full blown GY6 service manuals.
http://forums.atvconnection.com/chin...fo-needed.html
One is for a Carter Buggy, and one is for a scooter, but the engines in these an your quad is identical.
Both links worked for me this morning. On the buggynews page look at the first post, then download the *attachment* hosted at buggynews - don't follow the carter buggy link as that link is dead.
http://forums.atvconnection.com/chin...fo-needed.html
One is for a Carter Buggy, and one is for a scooter, but the engines in these an your quad is identical.
Both links worked for me this morning. On the buggynews page look at the first post, then download the *attachment* hosted at buggynews - don't follow the carter buggy link as that link is dead.
#17
#18
Join Date: Dec 2008
Location: Tracy, California, USA
Posts: 3,260
Likes: 0
Received 12 Likes
on
12 Posts
I don't know about the clutch - I've never had to remove mine yet. The flywheel needs a puller like this:
GY6 Flywheel Puller [0606080437] - $22.00 : BuggyDepot.com :: Parts and Performance Upgrades for Yerf-Dog 150, Blade 150, Crossfire 150, Twister Hammerhead, Carter Talon, and more!
I think if you google "GY6 Flywheel Puller" you find many sources.
GY6 Flywheel Puller [0606080437] - $22.00 : BuggyDepot.com :: Parts and Performance Upgrades for Yerf-Dog 150, Blade 150, Crossfire 150, Twister Hammerhead, Carter Talon, and more!
I think if you google "GY6 Flywheel Puller" you find many sources.
#19