Guys:

I have a race tomorrow and need to align my Speed. If any of you can tell me the toe-in or toe-out (I mean the inches to align the front tires with the rear tires, to be straight) of the ATV I'll REALLY appreciate it.......


PLZ help a C-Dale racer

 

1)First get handlebars straight.Use tie downs fromends of bars to nerfs to keep them straight.
2)Use a straight twobyfour or pipe put it up against side of back tire measure between pipe and front of front tire and back of front tire adjust tie rod till they are same.
3)Do same to other side.Some axles arent centered so left and right measures might be dif.Nothing you can do about that.
4)put a mark with chalk in center of tread at front of both fr tires measure between two marks.
5)Roll quad till both chalkmarks are at back of fr tires measure you want the measurement in back to be 1/4 to 1 in. BIGGER than the front measurement for toein.Adjust both tierods the same amount to get this