I bought a monsoon 90cc 4 wheeler not to long ago. It did not have a battery or chain and the terminals were missing for the battery. I got a battery and chain for it. I put new terminals on the wires for the battery.


After I did all of this, I tried starting is and it would not start. I checked that the fuse was good by checking there was power on both sides of the fuse.


When I checked for power to the starter, I found there was no power going to when trying to start the quad. I pulled the starter relay and jumped the wires and it would crank, but not start.


While I was letting it crank I verified that I was getting fuel and spark.


Where do I go from here to get it to run?