best donor frame
#1
i have a gsxr 600 motor complete and i need to know which would be the best donor frame for making this swap. i am working with a guiy that has extensive knowlege about fabrication and he owns a 5 second funny car. i know a funny car is not an atv but he is definitly mechanically gifted . if anyone knows which kind of frame would be the best it would be muchly appreciated. i dont want to spend alot of money on a bike that im just going to tkae the engine out and rip it up so i was wondering about a lt250 or banshee or nething.
#3
I have personally seen 2 different LT250 Quadracers with a CBR600 and one with a R1 Yamaha 600. Fit real nice with little modifications. They told me they just cut the middle section out and built it around the engine. Hope this helps any,Bubba
#4
just another question. would vibration be uncontrollable and unrideable. i have heard people bitching about counterbalance and i dont know whut that does so neoone that can help me here just gimme some info thanks
#5
if youve got a friend whos a capable fabricator why not stick with the bike frame and make a custom subframe to stick on the front,
if your after building a proper custom job it might be the way to go
i know its been done cos theres a company in the uk who make Race quads out of the honda CR500 mx bike
and there verry nice piece of kit
called WASP
if your after building a proper custom job it might be the way to go
i know its been done cos theres a company in the uk who make Race quads out of the honda CR500 mx bike
and there verry nice piece of kit
called WASP
#6
I could see on a big single why you would have vibration problems but with a 4 cylinder street bike engine I don't see an issue with vibration. They're smoother than smooth... at least the ones that I've had experience with.
I envy you!!!!!!!!! I've been waiting to find an engine like that myself!! Should be an absolute blast to run!!!
Good luck!!
I envy you!!!!!!!!! I've been waiting to find an engine like that myself!! Should be an absolute blast to run!!!
Good luck!!
#7
I used a blaster frame for mine. I would use a banshee or anything with disc brakes so you can stop the thing. As far as using the whole bike and making a quad. It doesn't really look like a quad when finished.
My 2cents
Cheers
My 2cents
Cheers
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



