weird, i know that peewee (one of the lay down's) runs a LS axle setup with a triple on nos and he hasnt had an issue yet. Said he had it dynoed at 250 on motor.

You made a pass that it held together didnt you? I have that on tape. If that was you what time did it run. I was camped 3 spots down from you i believe

 

I didnt get to make a pass, I tried twice and it broke twice, the problem is the LS setup was for an LT 250 The bolt pattern only had 4 bolts for the sprocket, and they were close tegether, ( not designed for that much tourque and certainly not for 380 HP )
When we dyno'd it there was'nt any snap to the rearend so they held up OK, but a 7,000 RPM drop at the lights was to much.