I have an 02 honda rubicon just put it back together and its running rich really rich. I have the highlifter bbk, as well as the cam. I have the head shaved as well as ported and polished. my cylinder has been decked as well. its running so rich that ir burns your eyes when you are at the back of the bike. I have ran the air/fuel mix screw out. i have restricted the vac pull line, I have made sure that the need is as low as it can go and then changed it back to as high as it can go. I have turned the fuel feed half way off. I have loosened the intake valves to make sure i have a little clatter and it is still running rich. factory jet as well as factory pipe w/ out the baffle. any one know what else i can do thanks Cory