i have an 88trx 250r that i race harescrambles with and was wondering if a rad valve would help any?everyone that i have talked to said that it would help a good bit.are they worth the 135$price tag

 

Get a vforce instead, much better. Dave

 

i have a 250r and a banshee-let me know what you go with and how it works, i'd like to know also what dif it makes

 

I would definitly go with the v force reeds. They work great. I ran a rav valve before. The v force works much better on top.

 

thanks for the suggestions but i need more low and mid range

 

TRY boysen "RAD" valve & a spacer, for bottom end.

 

I run 95% tight woods and hillclimbs and switched from a boyesen rad valve with a spacer to a vforce and spacer. The vforce is much better in my opinion. Dave

 

hi all i run baysson reed's i think they rock ofcourse its kinda hard to tell i have an ex raceing 86 4trx250r with a 310 kit i like the power my reed's put out and i have all the bottom of a 400 forman and the top speed of a dune banshee as far as v force reed's they do a mean job as well that and a set of used DG short pipes is all i had on it and that banshee would fly
i couldn t really say which is better id go for whichever the most people love count up the reply's go by vote hehe
86 atc&4trx250R's

 

a 250R will never have the lowend of a 400 foreman.

my take is go with the Vforce and a spacer.

 

The V-Force Delta 2 has adjustable petal tension. They come at the stiff setting and I believe the soft setting is for low end.