No crank from key.
#1
No crank from key.
2006 Sportsman 700 EFI
As far as I know all electrical is working except when I turn the key to START I get nothing. No click from solenoid or engine cranking. The engine will fire right up when I jump the solenoid.
I got the quad from an auction so I don’t know any history of the rig. I’ve replaced the solenoid, key switch, kill switch, wiring harnesses for those, and checked all fuses, cleaned connections and grounds.
I researched the wiring diagram and it shows a solenoid wire going to pin 16 on the ECU, but when I check that pin, it is not there and sealed off from the factory.
I’m out of ideas, Any tips?
As far as I know all electrical is working except when I turn the key to START I get nothing. No click from solenoid or engine cranking. The engine will fire right up when I jump the solenoid.
I got the quad from an auction so I don’t know any history of the rig. I’ve replaced the solenoid, key switch, kill switch, wiring harnesses for those, and checked all fuses, cleaned connections and grounds.
I researched the wiring diagram and it shows a solenoid wire going to pin 16 on the ECU, but when I check that pin, it is not there and sealed off from the factory.
I’m out of ideas, Any tips?
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)