thats all in the dealership, not polaris

 

sounds more like the guy putttin it together at the dealership didnt get things tight, I actually helped take my 850 out of the crate and put it together, the kid working on it was willing to learn but learned alot in a couple hours, if you know what I mean

 

You have the experience I am looking for to answer my situation::
do these units come with the tires on them
do these units come with the battery connected
do they have the side roll bars already connected
were the plastic guards already attached to the calapers
I did talk to both the dealership and the factory however they blamed each other for the problems
This 900xp is a dream, it is every thing the otheres are not/ fastetest/ quickest/ best desighned/ extreem machine--- but all the more reason to solve this problem / not a good idea to let a few /dm ***/ screw up what is the best package out there.
This is all about identifing the problems and fixing them- your experience could help do just that if you can answer the questions/ then I will force the fix on to whoever needs to make them happen--
I was at a local 4x4 park yesterday and ended up racing a few other extreem utv's-
In 2 wheel drive no one could beat the 900xp// however in 4 wheel drive it blew their doors off- it just walked away from all of them-- this thing is so strong out of the whole it is hard to keep control on loose surface, even in 4x4 mode-- And to think it comes out of the box that way

 

Sounds like a great machine. I wish we had more open areas to try one of those out here in New England.

 

The dealer is paid to do the PDI . Must of had a kid come in after school to do it.

 

Typical of too many businesses the guy in charge at the dealership was hired to go work directly for Polaris-- go figure

 

it is not polaris's fault .....these come in unassembled the batterys and cages must be assembled at dealership......in all honesty they probly had some kid putting it together for 6 bucks an hour......and honestly i will check over every thing myself on any new machine after i put a couple hours on it.....just makes good sense.....trust no one!!!!!

 

Thats what you get for letting mexicans build our stuff and letting a multi national company go out of the USA.Shitty products that are overpriced.