what gearing do you thinki should go with to get more top speed without hurting bottom end too much?

 

Thats a hard one to answer. You cant gain top speed without hurting bottom end. Without mods to compinsate for both then you have to find a happy medium.

 

with my motor and clutch set up i hav tons of bottom now but running out of speed on top not power

 

Then you would have to go with a smaller rear sprocket or larger front.I run a 36t for top speed and when I go trail riding or climbing I use a 42t rear. A huge difference in speed. With the 42t It will only do about 62mph. With the 36t it will top out at 67.

 

ok thanks alot

how much did bubba's porting help your bike? how much did he charge?

 

Bubba did a great job on the porting. It had a huge increase in power after the port job. I gained about 3mph on the top but most of all it made it pull alot harder throught the whole power range. You would have to talk to him about pricing. You have a scrambler so I dont know if he charges the same as a 250.

 

thanks a lot

i didn't realize your was a 250